We build a range of systems based on three main system components: the Dispenser, the Pump and Controller and the Chiller.
The Juggler Single
The Juggler Single is a single tap milk dispenser that can pour two types of milk from a single tap. The Juggler Single also includes a jug rinser set into the sink.
The Juggler Double
The Juggler Double has two taps, one for whole milk and the other for reduced fat milk. The Juggler Double also includes a jug rinser set into the sink.
Pump and controller
The Pump unit and Control unit are two separate modules. They are typically mounted on the side of the chiller closest to where the dispenser is located.
One door chiller
The one door chiller holds
4 x 10 litre bladders.
The one door chiller holds 4 x 10 litre bladders.
Two door chiller
The two door chiller holds
up to 8 x 10 litre bladders.
The two door chiller holds up to 8 x 10 litre bladders.
Three door chiller
The three door chiller holds
up to 12 x 10 litre bladders.
The Three door chiller holds up to 12 x 10 litre bladders.
Chiller – Internal Configuration Options
Bladder positions inside the chiller may be ‘Connect’ or ‘Store’ positions. A wire rack is also an option for some systems.
Connect 4 / Store 4
‘Connect 4 / Store 4’ means that up to 4 x 10 litre bladders can be connected to the dispensing system at any one time.
Another four bladders can be loaded in ‘store’ positions. These bladders are moved across to ‘connect’ positions as required.
‘Connect 8’ means that up to 8 x 10 litre bladders can be connected to the dispensing system at any one time.
In a Connect 8 chiller, up to four bladders can be connected to the left tap and up to four bladders can be connected to the right tap.
The wire rack is a standard fridge shelf. It allows you to store more in your Juggler chiller than just milk bladders.
The Juggler – complete systems
Below is a list of the standard units we build.
Custom systems are also possible.
|Dispensing Unit||Chiller||Internal Configuration||Includes|
|The Juggler Single||One Door||‘Connect 4’||4 trays|
|The Juggler Single||Two Door||‘Connect 4 / Store 4’||8 trays|
|The Juggler Double||One Door||‘Connect 4’||4 trays|
|The Juggler Double||Two Door||‘Connect 4 / Store 4’||8 trays|
|The Juggler Double||Two Door||‘Connect 8’||8 trays|
|The Juggler Double||Three Door||‘Connect 4 / Store 4’ / Wire Rack’||8 trays|
|The Juggler Double||Three Door||‘Connect 8 / Store 4’||12 trays|
Accessories, Options and Services
Delivery and installation
We can arrange delivery and installation by an approved, trained technician or you may select to install the machine yourself if you are the handy type.
LHS or RHS configuration
This describes which side of the chiller the pump and controller will be mounted. Eg: LHS means the pump and controller will be mounted to the left of the chiller when viewed from the barista’s side of the counter.
Milk line cleaner
The Juggler Milk Line Cleaner has been developed by Cafetto specifically for The Juggler. A box (containing 6 x 1-litre bottles) lasts approximately two months in a seven-day cafe and approximately three months in a five-day cafe.
Deep clean and service
We offer a deep clean and service visit as part of our HACCP accreditation. We recommend that this is performed at regular 6 month intervals.
Standard castor set
Standard castors make the overall height of the chiller 845mm.
Short castor set
Short castors make the overall height of the chiller 780mm.
Plinth (no castors)
The fridge can be set directly on a plinth rather than on castors. Where possible however, we recommend installing the fridge on castors rather than a plinth.
In cafes where there is only room to fit a smaller chiller holding less than a full day’s worth of milk, it can be useful to store extra bladders elsewhere in trays ready to load into The Juggler fridge.
Spare cleaning/blanking tool
The cleaning/blanking tools are an essential part of the cleaning system. Keep a spare handy in case of loss or damage.